Installing Softaculous Virtualizor for Linux-KVM is very simple.
- CentOS 5.x / 6.x / 7.x or Red Hat Enterprise Linux 5.x / 6.x or Scientific Linux 5.x / 6.x or Ubuntu 12.04 or Ubuntu 14.04 or Ubuntu 16.04(x86_64)
- yum / apt-get
- Storage to create the VPS (DomUs) disks
1. KVM module does not support 32 bit operating system. Please install a 64 bit OS if you want to install KVM.
2. KVM module requires VT enabled from the BIOS to be loaded.
3. We strongly recommend you make the bridge permanent. Guide – Making the bridge permanent
4. If you are using Ubuntu 18.04, please go through the following guide for making KVM bridge : KVM Bridge on Ubuntu 18.04
|/||80-100 GB||Root partition containing all Hardware Node operating system files, OS templates and ISOs|
|SWAP||4 GB +||Paging partition for the Linux operating system(Swap memory is been used by virtual servers if there is shortage of real memory)|
|Storage||All the remaining space on the hard disk|| This partition can be used to create either Logical Volumes or File Based Storage for the VPS (DomUs). |
NOTE for LVM : You must NOT create any Logical Volume and MOUNT it. This must be an EMPTY VOLUME GROUP.
Virtualizor will not delete any pre-existing LVs in the Volume Group. But its recommended to have an empty Volume Group.
NOTE for File Storage : You must create and mount the folder.
Open a Shell Terminal (e.g. PuTTY) and SSH to your server. Run the following commands:
wget -N http://files.virtualizor.com/install.sh chmod 0755 install.sh ./install.sh firstname.lastname@example.org kernel=kvm
Please give the email address correctly !
- email – The Admin Email Address
- kernel – In this case its kvm
- noos – If you dont want to download the DomU operating system for the DomU then please add noos=true as a parameter
- beta – If there is a newer version of Virtualizor available and you would like to test it then please add beta=true as a parameter
- nested_virt – If you want to enable Nested Virtualization on your server then please add nested_virt=1 as a parameter. If you enable this, it will install a new kernel for enabling nested virtualization. (NOTE: This feature is in BETA at the moment)
- lvg (optional) – If you are going to use LVM for the VPS storage. The Volume Group that will be used for the DomU (VPS) storage e.g. defaults to vg. It should have some OR ALL unallocated space to create LVMs for the VPS.
- interface – You can specify the default interface that you want to set. If not provided it will be considered as eth0.
- license – In case you are installing Virtualizor on internal network you will need to provide the VALID license key. To get internal license key you will need to open a support ticket.
The installation will begin immediately. It may seem that the installation has stopped, if your network speed is slow, but please let it continue. You will see something like this :
After the installation is completed you will be asked to reboot.
You can then visit the Admin Panel to create the Storage and the Virtual Servers and also manage your server.
Note : A log file of the installation process will be created – /root/virtualizor.log
To login to the Softaculous Virtualizor Admin Panel, visit the following URL :
Login with the servers root details.
After you login, you will see the Admin Panel Dashboard :
Virtualizor uses ports from 4081 – 4085. If there is any firewall restricting this, you will need to allow these ports.
For RHEL & CentOS < 7
iptables -I INPUT 1 -p tcp -m tcp --dport 4081:4085 -j ACCEPT
iptables -I INPUT 2 -p tcp -m tcp --dport 5900:6000 -j ACCEPT
For RHEL & CentOS 7+
firewall-cmd --zone=public --permanent --add-port=4081-4085/tcp
firewall-cmd --zone=public --permanent --add-port=5900-6000/tcp
NOTE: If you are going to use Webuzo templates for VM creation, please allow ports 2002-2005
Before creating any VMs, its necessary to define your storage.
Navigate to Virtualizor Admin Panel -> Storage -> Add Storage
You will see the following wizard :
Fill in the details and define the storage.
NOTE: If you are using RAID setup on your server, please create the VG from RAID disks (e.g. /dev/md1) and not from the actual disks (e.g /dev/sda1).
Please note that disk names can be different as per your setup, above explaination is just for an example.
Virtualizor Network in KVM
By default eth0 will be assumed as the Network Interface. To tell virtualizor to use anything other Network Interface, You need to set it here.
You can change these settings any time from the Virtualizor Admin Panel -> Configuration -> Slave Settings. The following is a screenshot of the available settings :
Virtualizor will create a viifbr0 bridge.
viifbr0 detects the IP, Netmask, GATEWAY from :
Hence if you change the above file, you will need to restart the virtualizor network :
root> service virtnetwork restart
Start Command :
root> service virtnetwork start
Stop Command :
root> service virtnetwork stop
NOTE : In all cases please remember to disable SElinux. The Virtualizor installer will try to disable it. For KVM make sure that VT is enabled from bios so VPS can be able to started .
Cant open http://IP-Address:4084
Please check if your iptables firewall is running You can disable it with the following command :
root> service iptables stop
For CentOS 7 :
root> systemctl stop firewalld
Disk resize issue on Ubuntu 16 and Ubuntu 18
NOTE : For vps hostname/disk resize issues on Ubuntu 16.04 and Ubuntu 18.04 with sfdisk version 2.27.1 , follow these steps to downgrade sfdisk on the server :
mv /sbin/sfdisk /sbin/sfdisk_new
wget -O /sbin/sfdisk http://files.virtualizor.com/utility/sfdisk
chmod 755 /sbin/sfdisk